I'm selling a 72 vw beetle for $4500. and a guy just sent me a message wanting to trade a 1987 bmw 325is turbo. This is the email he just sent me about it.
(1987 325is, delphin metallic with 202,xxx miles. The head was rebuilt last year, every seal, gasket, etc was replaced. The clutch and drive bearing were just replaced less than 1,000 miles ago. The belts and water pump were done at 180,xxx. The car is running a smaller turbo(t3/t4 .63/.50 a/r 57 trim wheel). It has a 2.5x6x18 intercooler placed right infront of the radiator. This setup is good because it is practically invisible from the outside and the high beams didn't have to be removed. Right now the car is running 7psi with 19# injectors. The turbo setup was installed/built by my friend josh in cincinnati. I was going to put on a m30 afm and 24# injectors to gain more power because i wanted to keep the psi low so there is not too much strain on the engine. The car has 17" ATS black wheels with falken tires. The wheels are VERY lightweight. Is has eibach springs and bilstein shocks. The paint on the top of the car(sunroof area) needs a respray because it is faded. There is some very minor surface rust areas but they are all not very visible. The car ran a 14.1 sec. 1/4 mile at just 7 psi. It pulls great and sounds awesome. Right now the car only has a downpipe...it sounds mean as hell but definately not legal.)
The book value said $2000. Any advice would be great. Thanks
(1987 325is, delphin metallic with 202,xxx miles. The head was rebuilt last year, every seal, gasket, etc was replaced. The clutch and drive bearing were just replaced less than 1,000 miles ago. The belts and water pump were done at 180,xxx. The car is running a smaller turbo(t3/t4 .63/.50 a/r 57 trim wheel). It has a 2.5x6x18 intercooler placed right infront of the radiator. This setup is good because it is practically invisible from the outside and the high beams didn't have to be removed. Right now the car is running 7psi with 19# injectors. The turbo setup was installed/built by my friend josh in cincinnati. I was going to put on a m30 afm and 24# injectors to gain more power because i wanted to keep the psi low so there is not too much strain on the engine. The car has 17" ATS black wheels with falken tires. The wheels are VERY lightweight. Is has eibach springs and bilstein shocks. The paint on the top of the car(sunroof area) needs a respray because it is faded. There is some very minor surface rust areas but they are all not very visible. The car ran a 14.1 sec. 1/4 mile at just 7 psi. It pulls great and sounds awesome. Right now the car only has a downpipe...it sounds mean as hell but definately not legal.)
The book value said $2000. Any advice would be great. Thanks