blower motor resistor
- Thread starter N.Black
- Start date
Welcome to the forums, not sure what you mean by "its cold and i need heat" as the blower motor cools the radiator on the front of the radiator.
Are you refuring to part #5, for the cabin fan resistor? http://www.realoem.com/bmw/showparts.do?model=1472&mospid=47278&btnr=64_0522&hg=64&fg=35
If so, remove your interior panels on the left side foot well up against the console and it will be staring at you.
Are you refuring to part #5, for the cabin fan resistor? http://www.realoem.com/bmw/showparts.do?model=1472&mospid=47278&btnr=64_0522&hg=64&fg=35
If so, remove your interior panels on the left side foot well up against the console and it will be staring at you.
On my 1988 I had to go in through the engine bay. There is a compartment near the center of the engine/cabin wall that you have to open, then remove the resistor in there. I removed mine, cleaned it off and had speeds 1, 3 and 4. So I replaced it with a new one and had all 4 speeds again. I think it was about ~$30 bucks canadian.
there is instructions floating around on the net. I googled searched for my instructions but cant find them right now. Think I got them off bmwe30.net, but the site doesnt seem to be up now.
there is instructions floating around on the net. I googled searched for my instructions but cant find them right now. Think I got them off bmwe30.net, but the site doesnt seem to be up now.
Last edited:
